ENVIREM® S.R.L. s.u. - VAT: IT02207771201
Via Antonio Meucci, 11 - I-40138 Bologna (BO)
Phone: +39 051 302273 - Fax: +39 051 4072900
 
Italiano
English
 
 
 
 
 
 
 
 
 
   
   
   
   
   
   
   
   
   

 

RUST-BANDIT®
WATER-BASED CORROSION INHIBITOR
MADE IN U.S.A.
RUST-BANDIT®
1 Lt.
€ 8,20+VAT

 
RUST-BANDIT®
2 Lt.
€ 14,76+VAT

RUST-BANDIT®
5 Lt.
€ 32,80+VAT

 
RUST-BANDIT®
10 Lt.
€ 57,40+VAT

RUST-BANDIT®
25 Lt.
CONFIDENTIAL
 
RUST-BANDIT®
220 Lt.
CONFIDENTIAL
RUST-BANDIT® is a water-based liquid compound that inhibits rust on all ferrous metals. It is designed for use on parts that are stored indoors.
Protection is provided immediately upon exposure to RUST-BANDIT® with no stress change in the metal.
RUST-BANDIT® is great for protecting parts after de-rusting with EVAPO-RUST® rust remover.
It dries fast with a clean, non-tacky feel and will not damage any polymers, plastics, coatings, and most paints.
RUST-BANDIT® prevents rust up to 12 months, depending on dilution and has an indefinite shelf life prior to use.
RUST-BANDIT® is not based on amine or nitrates, but rather the most recent advancements in rust protection chemistry which combines sebacic acids and salts.
 
OUTSTANDING BENEFITS AND FEATURES:
Rapidly coats and inhibits corrosion on all ferrous metals
Dries fast with a clean, non-tacky feel
Non-corrosive
Non-flammable
Biodegradable
No HAP's
No DOT restrictions
Easy and safe to use
Safe on soft metals, plastic, rubber, PVC and other surfaces unharmed by water alone
 
OUTSTANDING PERFORMANCE:
Internal tests using the ASTM D 1748-83 method (~130 degrees Fahrenheit and ~100% Relative Humidity) indicate RUST-BANDIT® will inhibit rust from forming for up to 12 months.
However, many factors will impact the length of protection time for any rust inhibitor.
If the item treated is smooth machined steel, then the protection can last longer than 12 months.
Conversely, if the item has an irregular shape with high energy points, then the protection will be closer to the 6 month period.
Other factors such as temperature and humidity will also affect the lifespan of any rust inhibitor.
Rust is less likely to form below an ambient temperature of 18°C.
If the storage facility is near the ocean, a salt fog or high humidity can impact the life of the protective coating.
 
DIRECTIONS/DILUTIONS:
Clean parts to allow RUST-BANDIT® to fully contact the metal surface being treated.
Immerse, spray, wipe or brush parts in RUST-BANDIT® then allow parts to dry.
The protection will be provided immediately upon exposure to RUST-BANDIT®.
Straight for 6 to 12 months
Dilution 1:1 with water for 6 months protection
Dilution 1:4 with water for 6 weeks protection
Dilution 1:7 with water for 3 days protection
RUST-BANDIT® should be removed prior to treating the metal with any other coating.
RUST-BANDIT® can leave a thicker coating in areas where there are angles or corners.
This buildup of RUST-BANDIT® could break down any paint or other coating that is applied on top of it.
Therefore, we recommend that the RUST-BANDIT® be rinsed off with water prior to another coating or paint being applied to the metal.
RUST-BANDIT® is extremely water soluble, and does not need much rinsing to remove it from an object.
In general, a 5 second rinse with tap water above 16°C is all that is required.